Used Framing Equipment:  Mat Cutters, Moulding Cutting & Joining Equipment, Mounting Presses, Hand Tools

We buy & sell pre-owned picture framing equipment. We also help you to sell your used framing equipment, and help you save on equipment that you may need. All Items are sold "As Is".  Although we strives get obtain the best information from the seller, AIM is not responsible from inaccuracies provided to us by seller. It is the responsibility of the buyer to crosscheck information with seller or manufacturer regarding descriptions that appear in this catalog.

Do you have Questions?  Feel free to our office at 330-405-9421, M-F, 10AM-5PM EST or Email us at info@skylinepictures.com

                      Pre-owned Framing Equipment     page 36     

Section 2: Frame Moulding Cutting, Joining Equipment, Miter Saws (Note: newest listings appear on latter pages)

Skip to Page:  #1 -  #2  -  #3  -  #4  #5 -  #6 -  #7 -  #8 -  #9  #10 -  #11  #12  #13 -  #14 -  #15 -  #16 -  #17 -  #18 - #19 -  #20  -  #21 -  #22 -  #23  #24  #25 - 

#26 -#27  #28  #29  #30 -  #31 -  #32 -  #33  #34 -  #35 -  #36  #37  #38 -  #39 -  #40 -  #41  #42 -  #43 #44 -  #45  #46  #47 -  #48  #49 -  #50 -  #51 - 

#52  #53 -  #54 -  #55 -  #56  #57  #58  #59  #60 -  #61 -  #62-  #63 #64-  #65 #66 #67 #68-  #69 #70-  #71-  #72 #73-  #74-  #75 #76-  #77-  #78 - #79 -#80 -

-#81 -#82 -#83 -#84  -#85 -#86 -#87 -#88 -#89 -#90 -#91 -#92 -#93 -#94 -#95 -#96 -#97 -#98 -#99 -#100 -#101 -#102 -#103 -#104 -#105 -#106 -#107 -#108 -#109 -

#110 -#111 -#112 -#113 -#114 -#115 -#116 -#117 -#118 -#119 -#120 -#121 -#122 -#123 -#124 -#125 -#126 -#127 -#128 -#129 -#130 -#131 -#132 -#133 -#134 -#135 -#136 -#137 -#138 -#139 -

#140 -#141 -#142 -#143 -#144 -#145 -#146 -#147 -#148 -#149 -#150 -#151 -#152 -#153 -#154 -#155 -#156 -#157 -#158 -#159 -#160 -#161 -#162 -#163 -#164 -#165 -#166 -#167 -#168 -#169

-#170 -#171 -#172 -#173  -#174  -#175 -#176 -#177 -#178 -#179 -#180 -#181 -#182 -#183 -#184 -#185 -#186 -#187 -#188 -#189 -#190 -#191 -#192 -#193 -#194 -#195 -#196 -#197 -#198 -#199

-#200-#201 -#202 -#203 -#204 -#205 -#206 -#207 -#208  -#209 -#210 -#211 -#212 -#213 -#214 -#215 -#216 -#217 -#218 -#219 - #220  -#221- #222-#223-#224-#225-#226-#227-#228-#229-#230-

-#231-#232-#233-#234-#235-#236-#237-#238-#239-#240-#241-#242-#243-#244-#245-#246-#247-#248-#249 -#250-#251-#252-#253-#254-#255-#256-#257-#258-#259-#260-#261-#262-#263

-#264-#265-#266-#267-#268-#269-#270-#271-#272-#273-#274-#275-#276-#277-#278-#279-#280-#281-#282-#283-#284-#285-#286-#287-#288-#289-#290-#291-#292-#293

-#294-#295-#296-#297-#298-#299-#300-#301-#302-#303-#304-#305

All Items On This Page Are Sold - See Latter Pages For Newest Listings

 

*** Price Reduction Item # UFE-1103   $795

Full Image

Fletcher 5100 Pneumatic V-Lock Underpinner

Fletcher 5100  V-Nail Frame Assembly Machine

This is joiner is in Good Working Condition. Includes a few partial boxes of nails. This was used in a small volume mom & pop frame shop.

Weighs about 120lbs. and is 2'x 1 1/2' x 4'

Manufactured: 4/97

This item can be picked up in the North Carolina, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

STEVE-NC-7-22-10 $800 / 11-13-10 $795

Sold - Steve 8-23-10    Return Home

 

Set of 4 Vices

Item # UFE-1104   $ 150

Full Image

Art Framing Vices

These Vices Good Working Condition

This is being sold as a set of 4

 

This item can be picked up in the North Carolina, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

STEVE-NC-7-22-10

Sold 8-23-10      Return Home

 

*** Reduced Item # UFE-1105   $ 2,995

Full Image

Pistorius MN-300 Double Miter Saw

 Comes with measuring table...

Serial # 28678

Manufactured:

 

 

14" Blades

 

This item can be picked up in North Carolina, or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

JAY-NC-7-23-10 3500 / 8-23-10 2995

Sold-8-28-12-Jay   Return Home

Item # UFE-1106   $ 750

Full Image

Jyden Chopper

Foot Operated - Model

 

This is in Very Good Condition. Comes with 2 extra sets of blades & 60" extended rail

This item can be picked up in the Ohio, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

TOM-OH-7-23-10

Sold 7-27-10         Return Home

 

Item # UFE-1107   $3,700

 

Full Image

CTD D45AX Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained.

From Manufacturer's Website:

 

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

 

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

 

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

  

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

  

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

  

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

  

Table Height: 34-1/2 (88cm) from floor.

  

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

 

  • Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
     
  • Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
     
  • Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
     
  • Actuation: Pneumatic foot valve with cover
     
  • Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
     
  • Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in NC or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

MARK-MC-NC-7-23- 09

JP-Sold 4-28-11    Return Home

 

 

List Price $260

Item # UFE-1108   $185

Full Image

Frame Square Fillet Cutter / Trimmer

This is in Excellent Condition. Bought new in 2006, it has been used very little and is coming from a frame shop which recently closed.

Precision Fillets / Trim Cutter for Fillets

Cuts fillets up to 3/4" Wide

Blades can be reversed before sharpening for longer life.

 

The Frame Square Trim Cutter cuts wood and plastic mat fillet like a precision mini chopper.

  Cuts wood & plastic mat fillet & lip liners
 Tool steel blades are reversible
 Two way fence, one way for hollow plastic,
   and one way for wood. .
 Easy hand operation
 Adjustable scale for fillet width and length.
 Standard scale measures to 48

 New Units Are Available Can Be Ordered here  

This item can be picked up in the Iowa, or shipped for an additional fee by freight carrier. Shipping is not the $6.50 default on the order page.

JIMMARCIA-IA-7-29-10

  Sold 8-4-10    Return Home

wpe3F.jpg (1396 bytes)Click Arrow For Next Page

RETURN TO FRAMING EQUIPMENT

CLICK HERE FOR AIM's CATALOG INDEX OF SKYLINE, STADIUM, AND SPORTS PRINTS - WHOLESALE SUPPLIER TO GALLERIES AND FRAME SHOPS 

We Accept: Visa/MasterCard/Discover/Debit/Certified Check or Money Order

 Produced By: A.I.M. Enterprises, Inc.    phone: 330-405-9421
(c) Copyright 2015 All rights in all media reserved.

 

Used Pistorius MN300 MN-300 MN200 MN-200 Double Miter Saw, Used CTD D45AX D45 D45FX Double Miter Saw, Used CTD D45AX Double Miter Saw 12" Pneumatic Air Operated, Used Fletcher 5100 5600 5700 Pneumatic V-Lock Frame Joiner Underpinner, Fletcher 5100 Pneumatic V-Nail V-Nailer Frame Assembly Machine, Used ITW MItreMite VN 2+1 V-Nail V-Nailer Framing Equipment Underpinner Joiner for Sale, Used Picture Framing Equipment for Sale, Pre-Owned Used Mitre Mite VN2+1 Frame Joiner to Assemble Frames for Frame Shops Art Galleries, Used Jyden Foot Chopper, Morso Chopper For Sale, Art Framing Vices Joining Frames Moulding, Used Frame Shop Moulding Vices Vice for Sale, Framing Tools, Used Parts Part, Buy Used Framing Frame Shop Equipment Store, Selling Sell Your Framing Equipment, Buy Used Framing Equipment, Discount Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Used Framing Equipment