Dealer / Distributor of:  Frame Square the 4th Corner Solution

New Framing Equipment:  Mat Cutters, Moulding Cutting & Joining Equipment, Mounting Presses, Hand Tools, Parts & Accessories.

We also buy & sell pre-owned picture framing equipment. We will help you sell your used framing equipment.

Do you have Questions?  Feel free to call our office at 330-405-9421, M-F, 10AM-5PM EST or Email us at info@skylinepictures.com

If you are looking for any Frame Square brand equipment or parts not appearing in our catalog, call us for catalog or further information.

                      New Framing Equipment         

Section 2: Frame Moulding Cutting, Joining Equipment, Miter Saws   page 2

Skip to Page:    #1 -  #2  -  #3  -  #4  -  #5  -  #6  -  #7  -  #8  -  #9  -  #10  -  #11  -  #12  -  #13  -  #14  -  #15  -  #16  -  #17  -  #18  -  #19  -  #20  -  #21  -  #22  -  #23  -  #24  -  #25  -  #26  -  #27

  -  #28

Item # NFE-7   $ Call for Pricing

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Frame Square Saw Model 1000

Ideal for small to medium production, Frame Square precision mitre saws ** are the 4th corner solution, easy to use and is the one saw that handles all your needs. ...comes with 10" blade and 1/2 HP motor. See below for detail:

 

Frame Square builds precision mitre saws with built in accuracy for today’s professional framers and woodworkers.  Our mitre saws  cut aluminum , wood, MDF or styrene mouldings with micro-precision angles.  The guide arms are not adjustable.  They are set for 45° at the factory.  Optional arms for 22-1/2° are available as well as rabbet offset guides for wide double rabbet mouldings.
 
Heavy duty clamps are standard to hold all materials safely while cutting and the motion lever controls the table top movement with hands away from saw blade at all times.
 
Don’t waste time with “do-overs”... do it right the first time with Frame Square.

** When picture frame rails are not cut at an accurate 45°, the 4th corner will require more time and effort to join than the other 3 corners combined.  Your reputation rests on the 4th corner. Cut it right the first time.

Model 1000 Precision Mitre Saw on floorstand.

10” blade Cuts all types of moulding up to 5” wide and almost 3.5” high.
A ½ HP motor is standard and a 1 HP motor is optional.
Top measure stop allows for pre-cutting rails to length without swinging long pieces of moulding.

Note: Optional 22 1/2 degree Octagonal Arm Attachment appears in photo and is available for $150.

 

Return Home

Item # NFE-8   $ Call for Pricing

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Frame Square Saw Model 4200

Ideal for small to medium production, Frame Square precision mitre saws ** are the 4th corner solution, easy to use and is the one saw that handles all your needs. ...comes with 12" blade and 1 HP motor. See below for detail:

 

Frame Square builds precision mitre saws with built in accuracy for today’s professional framers and woodworkers.  Our mitre saws  cut aluminum , wood, MDF or styrene mouldings with micro-precision angles.  The guide arms are not adjustable.  They are set for 45° at the factory.  Optional arms for 22-1/2° are available as well as rabbet offset guides for wide double rabbet mouldings.
 
Heavy duty clamps are standard to hold all materials safely while cutting and the motion lever controls the table top movement with hands away from saw blade at all times.
 
Don’t waste time with “do-overs”... do it right the first time with Frame Square.

** When picture frame rails are not cut at an accurate 45°, the 4th corner will require more time and effort to join than the other 3 corners combined.  Your reputation rests on the 4th corner. Cut it right the first time.

Model 4200 Precision Mitre Saw on floorstand.

Models 4000 & 4200 Precision Mitre Saws cut “with the grain” for superior cuts on wood. Triple chip 10” or 12” blades cut all type of moulding up to 6” wide and almost 4.5” high.  ½ HP motor is standard on 10” saw (Bench Model 4000 ) & 1 HP motor is standard on 12 “ (Floor Model 4200).  A scrap support keeps the end cuts clean and a marking gauge allows for pre-cutting rails to length without swinging long pieces of moulding.

Return Home

Item # NFE-9   $ Call for Pricing

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Frame Square Saw Model 4000 (Bench Model)

Ideal for small to medium production, Frame Square precision mitre saws ** are the 4th corner solution, easy to use and is the one saw that handles all your needs. ...comes with 10" blade and 1/2 HP motor. See below for detail:

 

Frame Square builds precision mitre saws with built in accuracy for today’s professional framers and woodworkers.  Our mitre saws  cut aluminum , wood, MDF or styrene mouldings with micro-precision angles.  The guide arms are not adjustable.  They are set for 45° at the factory.  Optional arms for 22-1/2° are available as well as rabbet offset guides for wide double rabbet mouldings.
 
Heavy duty clamps are standard to hold all materials safely while cutting and the motion lever controls the table top movement with hands away from saw blade at all times.
 
Don’t waste time with “do-overs”... do it right the first time with Frame Square.

** When picture frame rails are not cut at an accurate 45°, the 4th corner will require more time and effort to join than the other 3 corners combined.  Your reputation rests on the 4th corner. Cut it right the first time.

Models 4000 & 4200 Precision Mitre Saws cut “with the grain” for superior cuts on wood. Triple chip 10” or 12” blades cut all type of moulding up to 6” wide and almost 4.5” high.  ½ HP motor is standard on 10” saw (Bench Model 4000 ) & 1 HP motor is standard on 12 “ (Floor Model 4200).  A scrap support keeps the end cuts clean and a marking gauge allows for pre-cutting rails to length without swinging long pieces of moulding.

Return Home

Item # NFE-10   $260

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Frame Square Trim Cutter

Precision Fillets / Trim Cutter for Fillets

Cuts fillets up to 3/4" Wide

Blades can be reversed before sharpening for longer life.

 

The Frame Square Trim Cutter cuts wood and plastic mat fillet like a precision mini chopper.

Cuts wood & plastic mat fillet & lip liners
•  Tool steel blades are reversible
•  Two way fence, one way for hollow plastic,
   and one way for wood. .
•  Easy hand operation
•  Adjustable scale for fillet width and length.
•  Standard scale measures to 48”

 

Return Home

 

Item # NFE-11   $324

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Frame Square Fillet Pro with Precise Measuring System

Precision Fillets / Trim Cutter for Fillets

Cuts fillets up to 3/4" Wide

Blades can be reversed before sharpening for longer life.

The Holding Bracket simply bolts onto any new or existing Frame Square Trim Cutter, and the Measuring Fence sets onto the bracket.    When you remove and adjust the fence to fit  your mat (both dimensions) you’re ready to cut the fillet.  Note: The Holding Bracket and Measuring Fence will replace the scale that Is normally found on a Frame Square Trim Cutter.  (Trim Cutter shown is included in pricing for the Fillet Pro)

(Precise measuring system will handle up to a 24" opening, an additional 24" extension is available for $16, this will allow you to handle up to a 48")

The Frame Square Trim Cutter cuts wood and plastic mat fillet like a precision mini chopper.

Cuts wood & plastic mat fillet & lip liners
•  Tool steel blades are reversible
•  Two way fence, one way for hollow plastic,
   and one way for wood. .
•  Easy hand operation
•  Adjustable scale for fillet width and length.
•  Standard scale measures to 48”

 

Return Home

Item # NFE-12   $129

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Precise Measuring System - works with all Frame Square Trim Cutters

The Holding Bracket simply bolts onto any new or existing Frame Square Trim Cutter, and the Measuring Fence sets onto the bracket.    When you remove and adjust the fence to fit  your mat (both dimensions) you’re ready to cut the fillet.  Note: The Holding Bracket and Measuring Fence will replace the scale that Is normally found on a Frame Square Trim Cutter.  

 

 

 

(Precise measuring system will handle up to a 24" opening, an additional 24" extension is available for $16, this will allow you to handle up to a 48")

 

Return Home

Item # NFE-13   $1,590 (as shown above)

Item # NFE-13s   $1,250 (with standard top and without stand - not shown)

Call to see if there is any pricing specials for the month.

330-405-9421, M-F, 10AM-5PM EST

Full Image

Frame Square Model 1700 Jiffy Joiner

comes with floor stand, cartridge v-nail feed & optional top with support bracket.

Ideal for small to medium production, Frame Square  Jiffy Joiner nmodel 1700 is designed to join frmes with manual operation. No air or electricity needed.

 

Frame Square Model 1700 “Jiffy Joiners” are built with precision to give the tightest and most  accurate corner joints available. Using four sizes of v- type nail fasteners, but no electricity or air, our joiners force the rails together for an extremely tight corner.  Another 4th corner solution.
 

Features:

•  No air or electricity required
•  Zero set up time (no stops to set)
•  Knee operated rabbet clamp permits
   precise alignment of frame parts
   before driving the v-nail fasteners .
•  Rabbett clamp acts as a great vise.
•  Joins all profiles
•  Nails can be stacked
•  Inexpensive to own
•  Cam operated driver for effortless
   insertion of v-nail in soft or hard woods.
•  V-type nails held in metal cartridges for
   ease of loading and size changes.
•  Standard unit can mount to existing
   work bench and be set level or at an
   optimal  angle.   
•  Rabbet clamp actuated by knee pad,
   locks in over-center position for positive
   holding of corner until you release it.

 

Specifications:
Moulding range = 3/8” to 2-7/8” high x 3/8 to 3” wide
Frame size = 2” x 2” smallest,  unlimited for largest.
Machine size = 22” deep x 10” wide x 13”
Nail cartridges for 1/4”, 3/8”, 1/2” and 5/8” height nails

Return Home

wpe3F.jpg (1396 bytes)Click Arrow For Next Page

RETURN TO NEW FRAMING EQUIPMENT

CLICK HERE FOR AIM's CATALOG INDEX OF SKYLINE, STADIUM, AND SPORTS PRINTS - WHOLESALE SUPPLIER TO GALLERIES AND FRAME SHOPS 

We Accept: Visa/MasterCard/Discover/Debit/Certified Check or Money Order

 Produced By: A.I.M. Enterprises, Inc.    phone: 330-405-9421
(c) Copyright 2016 All rights in all media reserved.

 

Frame Square Mitre Saw Model 1000, New FrameSquare Mitre Miter Saw, Frame Square Mitre Saw Model 4200, New FrameSquare Mitre Miter Saw, For 6" Wide Moulding Cuts, Frame Square Dealer Distributor Frame Square Replacement Saw Blades, Replacement Blades, Octagonal 22 1/2 degree Arm Attachment, Frame Square Fillet Cutter, New FrameSquare Precision Fillet Cutter Chopper, Frame Square Industries Distributor, Craigslist Ebay Framing Equipment for Sale, Instruction Video Manual, Manual Frame Framing Joiner Underpinner V-nailer, New FrameSquare Jiffy 1700 Manual Joiner for Art Frame Shops, Spare Parts Accessories, Frame Square Frame Store Framing Equipment Manuals Underpinner Framing Equipment for Frame Shops Art Galleries, Buy New Framing Frame Shop Equipment Store, Selling Sell Your Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Framing Equipment Selling Sell Your Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Used Framing Equipment Phone 216-663-7400